Standard

ISO 185:2020

Historical draft

Note: This standard has a new edition: ISO 185:2020

Preview

Corrigendums and amendments are bought separately.

Language
Services

Abstract

1 Scope This document specifies the properties of unalloyed and low-alloyed grey cast irons used for castings that have been manufactured in sand moulds or in moulds with comparable thermal behaviour. This document specifies the characterizing properties of grey cast irons by any of the following: a) the tensile strength of cast samples; b) if agreed by the manufacturer and the purchaser, the tensile strength of samples cut from a casting; c) if agreed between the manufacturer and the purchaser, the hardness of the material determined on castings or on a cast-on knob. If agreed by the manufacturer and the purchaser, the combination of tensile strength from option a) or option b) and plus hardness from option c) can be specified. Information on specifying a combination of tensile strength and hardness is given in Annex B. This document specifies eight grades of grey cast iron according to tensile strength (see Table 1) and six grades of grey cast iron according to Brinell hardness (see Table 2). This document does not apply to grey cast irons used for pipes and pipe fittings and continuous cast products. This document does not cover technical delivery conditions for grey iron castings. NOTE General information on the engineering properties of grey cast irons is provided in ISO/TR 10809-1.

Document information

  • Standard from ISO
  • Published:
  • Edition: 4
  • Version: 1
  • Document type: IS
  • ICS 77.080.10
  • ISO TC ISO/TC 25

Product Relations

Product life cycle