Standard

ISO 7194:2008

Historical draft

Note: This standard has a new edition: ISO 7194:2008

Preview

Corrigenda and amendments are bought separately.

Language
Services

Abstract

ISO 7194:2008 specifies velocity-area methods for measuring flow in swirling or asymmetric flow conditions in circular ducts by means of current-meters of Pitot static tubes. ISO 7194:2008 specifies the measurements required, the precautions to be taken, the corrections to apply, and describes the additional uncertainties which are introduced when a measurement in asymmetric or swirling flow has to be made. Only flows with a negligible radial component are considered, however. Furthermore, it is not possible to make a measurement in accordance with ISO 7194:2008 if, at any point in the measuring cross-section, the local velocity makes an angle of greater than 40° with the axis of the duct, or where the index of asymmetry Y (defined within ISO 7194:2008) is greater than 0,15. ISO 7194:2008 deals only with instruments for measuring local velocity as defined in ISO 3354 and ISO 3966. If Pitot static tubes are used, ISO 7194:2008 applies only to flows where the Mach number corresponding to local velocities does not exceed 0,25.

Document information

  • Standard from ISO
  • Published:
  • Edition: 2
  • Version: 1
  • Document type: IS
  • ICS 17.120.10
  • ISO TC ISO/TC 30/SC 5

Product Relations

Product life cycle