Standard

NS-EN 13709:2010

Published
Preview

Corrigendums and amendments are bought separately.

Language
Services

Abstract

This European Standard specifies the requirements for steel globe and globe stop and check valves which are wrought, cast or fabricated in straight, angle or oblique pattern with end connections flanged, butt welding, socket welding or threaded. This standard is applicable to steel globe and globe stop and check valves mainly used for industrial and general purpose applications. However, they can be used for other applications provided the requirements of the relevant performance standards are met. The range of nominal sizes covered is: DN 8; DN 10; DN 12; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400. DN 8 and DN 12 are not used for PN designated flanged end connections. DN 8, DN 10 and DN 12 are not used for Class designated flanged end connections. Socket welding end valves and threaded end valves are limited to the range DN 8 to DN 65. The range of pressure designations covered is: a) for flanged and butt welding end valves: - PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; - Class 150; Class 300; Class 600. b) for socket welding end valves and threaded end valves: - PN 40; PN 63; PN 100; - Class 600; Class 800. NOTE Class 800 is a Class designation widely used for socket welding and threaded end valves.

Document information

  • Standard from SN
  • Published:
  • Edition: 2010-05
  • Version: 1
  • Document type: NAT
  • ICS 23.060.10
  • ICS 23.060.20
  • ICS 23.060.50
  • National Committee CEN/TC 69

Legal references

EU law: 2014/68/EU, 97/23/EC

Product Relations

Product life cycle