Standard

NS-EN 15202:2019

Published
Preview

Corrigendums and amendments are bought separately.

Language
Services

Abstract

This document specifies basic connection dimensions of LPG cylinder valves (manufactured in accordance with EN ISO 14245 and EN ISO 15995) and connectors (including pressure regulators) to enable them to be safely connected together. NOTE 1 Figure 1 (type G.1) to Figure 19 (type G.33) give the types of threaded outlet connections. NOTE 2 Figure 20 (type G.50) to Figure 34 (type G.66) give the types of non-threaded outlet connections. This document lists potentially unsafe connections where it might be possible to connect together, but which, when connected, might not be sound or secure in some operating conditions or orientations. This document specifies a marking system that is intended to ensure that only valves and connecters that are marked with the same connector type number are used in combination. This document also recommends tightening torques for the attachment of screwed metal-to-metal connections. Quality assurance systems, production testing and particularly certificates of conformity are not covered in this document. This document excludes connections for automotive vehicles covered by UN/ECE Regulation No. 67 Part 1 and EN 13760. This document excludes connections for gas cartridges covered by EN 417.

Document information

  • Standard from SN
  • Published:
  • Edition: 2019-12
  • Version: 1
  • Document type: NAT
  • ICS 23.060.40
  • National Committee SN/K 39

Product Relations

Product life cycle