Standard

NS-EN ISO 176:1999

Withdrawn

Note: This standard has a new edition: NS-EN ISO 176:2005

Preview

Corrigendums and amendments are bought separately.

Language
Services

Abstract

1.1 This International Standard specifies two empirical methods for the quantitative determination of the loss of mass from a plastic material under defined conditions of time and temperature, in the presence of activated carbon. 1.2 These methods are used, in particular, for the quantitative determination of the loss on heating of plasticizers from plasticized plastic materials in which case it is generally assumed that no significant amounts of other volatile materials are present. 1.3 These are empirical test methods, only suitable for a rather rapid comparison of the losses of plasticizers or, in general, of volatile compounds, from different plastics. 1.4 They may also be employed for the comparison of different types of plasticizers; in this case Standard compounds should be prepared, on the basis of a weil characterized resin, with known ratios of resin to plasticizer. NOTE - These comparisons are possible only if the test specimens are of the same thickness. If it tan be assumed that, after reconditioning, the moisture content of the exposed specimens is equal to that obtaining after the original conditioning, the effect of moisture may be ignored. 1.5 Two methods are specified : Method A : the test specimens are in direct contact with the carbon; this method is particularly useful for materials which have to be tested at relatively low temperatures because they flow at higher temperatures. Method B : the test specimens are placed in wire cages which prevent direct contact between the test specimens and the carbon.

Document information

  • Standard from SN
  • Published:
  • Withdrawn:
  • Edition: 1
  • Version: 1
  • Document type: NAT
  • ICS 83.080.01
  • National Committee SN/K 138/ NS 416

Product Relations

Product life cycle