Standard

NS-EN ISO 2507:2026

Mar 2026 Published

Corrigendums and amendments are bought separately.

Language English

Services Read Online (No printing ) kr 682,00 Printed and bound Delivery time: 5-10 days kr 853,00

There are no extended editions available for this standard

There are no available corrigendum or amendments for this standard. Any future corrigendum and amendments will be added automatically for subscribers.

Abstract

The method specified is based on determining the temperature at which a standard indenter, under a force of 50 N ± 1 N, penetrates 1 mm into the surface of a test piece cut from the wall of a pipe or fitting while the temperature is raised at a constant rate. Is applicable only to thermoplastics materials for which it is possible to measure the temperature at which the rate of softening becomes rapid. Is based on ISO 306:1994 which, however, applies to materials in the form of sheets.

Document information

Standard from SN
Published: 18 March 2026
Edition: 2026-02
Version: 1
Document type: NAT
ISBN:

ICS 23.040.20
ICS 23.040.45

Product Relations

Referred by: NS-EN 13476-2:2025
Referred by: NS-EN 13476-3:2025
Referred by: NS-EN 17670-2:2023
Referred by: NS-EN 607:2023
Referred by: NS-EN 1401-1:2019+A1:2023
Referred by: NS-EN 1566-1:2022
Referred by: NS-EN 1455-1:2022
Referred by: NS-EN 1329-1:2020
Referred by: NS-EN 13476-3:2018+A1:2020
Referred by: NS-EN 13476-2:2018+A1:2020
Referred by: NS-EN 13598-1:2020
Referred by: NS-EN 13598-2:2020
Referred by: NS-EN 1401-1:2019
Referred by: NS-EN 13476-2:2018
Referred by: NS-EN 13476-3:2018
Replaces: NS-EN ISO 2507-2:2017
Replaces: NS-EN ISO 2507-1:2017
Replaces: NS-EN ISO 2507-3:2017
Referred by: NS-EN 12566-3:2016
Referred by: NS-EN 12566-3:2005+A2:2013
Referred by: NS-EN 1401-1:2009
Referred by: NS-EN ISO 15877-2:2009
Referred by: NS-EN ISO 15877-3:2009
Referred by: NS-EN 13476-3:2007+A1:2009
Referred by: NS-EN 12566-3:2005+A1:2009
Referred by: NS-EN 13476-2:2007
Referred by: SN-CEN/TS 14541:2007
Referred by: NS-EN 607:2004
Referred by: NS-EN 12200-1:2000
Referred by: NS-EN 1453-1:2000
Referred by: NS-EN 1455-1:1999
Referred by: NS-EN 1566-1:1998
Referred by: NS-EN 1565-1:1998
Adopted from: EN ISO 2507:2026

Product life cycle

Previous product

Withdrawn

NS-EN ISO 2507-2:2017

Withdrawn

NS-EN ISO 2507-1:2017

Withdrawn

NS-EN ISO 2507-3:2017
Current product

Published

NS-EN ISO 2507:2026

NS-EN ISO 2507:2026

Access to standards for the entire organization

Benefits of our business solution:

Contact us today for a non-binding offer