Standard

NS-EN ISO 6145-7:2010

Withdrawn

Note: This standard has a new edition: NS-EN ISO 6145-7:2018

Preview

Corrigendums and amendments are bought separately.

Language
Services

Abstract

ISO 6145-7:2009 specifies a method for continuous production of calibration gas mixtures, containing two or more components, from pure gases or other gas mixtures by use of commercially available thermal mass-flow controllers. If this method is employed for the preparation of calibration gas mixtures, the optimum performance is as follows: the relative expanded uncertainty of measurement, U, obtained by multiplying the combined standard uncertainty by a coverage factor k = 2, is not greater than 2 %. If pre-mixed gases are used instead of pure gases, mole fractions below 10-6 can be obtained. The measurement of mass flow is not absolute and the flow controller requires independent calibration. The merits of the method are that a large quantity of the gas mixture can be prepared on a continuous basis and that multicomponent mixtures can be prepared as readily as binary mixtures if the appropriate number of thermal mass-flow controllers is utilized.

Document information

  • Standard from SN
  • Published:
  • Withdrawn:
  • Edition: 2010-12
  • Version: 1
  • Document type: NAT
  • ICS 71.040.40
  • National Committee CEN/BT

Product Relations

Product life cycle