Standard

NS-EN ISO 6974-5:2001

Withdrawn

Note: This standard has a new edition: NS-EN ISO 6974-5:2014

Preview

Corrigendums and amendments are bought separately.

Language
Services

Abstract

This part of ISO 6974 describes a gas chromatographic method for the quantitative determination of natural gas constituents using a three-column system. This method is applicable to natural gases of limited range, on-line and automatically calibrating on a regular basis for gas samples not containing any hydrocarbon condensate and/or water. It is applicable to the analysis of gases containing constituents within the mole fraction ranges given in Table 1. These ranges do not represent the limits of detection, but the limits within which the stated precision of the method applies. Although one or more components in a sample may not be detected present, the method can still be applicable.This part of ISO 6974 is only applicable if used in conjunction with parts 1 and 2 of ISO 6974.Hydrocarbons higher than n-pentane are expressed as the "pseudo-component" C6+ which is measured as one composite peak and calibrated as such. The properties of C6+ are calculated from detailed analyses of the individual C6 and higher hydrocarbons by extended analysis or from historical data.Oxygen is not a normal constituent of natural gas and would not be expected to be present in gas sampled for an on-line instrument. If any oxygen is present as a result of air contamination, it will be measured with the nitrogen. The resulting (nitrogen + oxygen) value will be in error to a small extent because of the slight difference between detector responses for oxygen and nitrogen. Nonetheless, the result for the natural gas/air mixture will be reasonably accurate since neither component contributes to the calorific value.The content of helium and argon are assumed to be negligible and unvarying such that helium and argon need not be determined.

Document information

  • Standard from SN
  • Published:
  • Withdrawn:
  • Edition: 2001-08
  • Version: 1
  • Document type: NAT
  • ICS 75.060

Product Relations

Product life cycle