Standard

NS-EN 15892:2011

Tilbaketrukket
Forhåndsvisning

Rettelser og tillegg kjøpes separat.

Språk
Tjenester

Omfang

This European Standard specifies a type test method to measure noise levels inside the driver's cabs of railway vehicles for assessing compliance with the relevant European legislation. NOTE The relevant European legislation includes Directive 2003/10/EC of 6 February 2003 and the Commission Decisions of 23 December 2005 (Technical specification for interoperability relating to the subsystem ‘rolling stock - noise’ of the trans-European conventional rail system) and of 21 February 2008 (Technical specification for interoperability relating to the ‘rolling stock’ sub-system of the trans-European high-speed rail system). This method is applicable to: - the measurement of noise inside driver's cab resulting from the sounding of external warning horns when the vehicle is stationary; - the measurement of noise inside the driver cab while the vehicle is running. The method is not applicable to: - complementary measurements that can be requested for acceptance tests, but which are not required by the TSIs referred to in this standard; - the measurement of the noise from internal and external audible devices other than external warning horns; - routine monitoring of the noise exposure of train crew. The test procedures specified in this European Standard are of engineering grade (grade 2) with a precision of ± 2 dB, which is the preferred method for noise declaration purposes, as defined in EN ISO 12001.

Dokumentinformasjon

  • Standard fra SN
  • Publisert:
  • Tilbaketrukket:
  • Utgave: 2011-02
  • Versjon: 1
  • Varetype: NAT
  • ICS 17.140.30
  • ICS 45.060.10
  • National Committee SN/K 999/EG 35

Referanser i lov

EU lov: 2008/57/EC, 2001/16/EC, 96/48/EC

Produktrelasjon

Produkt livssyklus