Standard

NS-EN 1678:1998

Tilbaketrukket

Merknad: Denne standarden har en ny utgave: NS-EN 1678:1998+A1:2010

Forhåndsvisning

Rettelser og tillegg kjøpes separat.

Språk
Tjenester

Omfang

This standard specifies the safety and hygiene requirements for the design and manufacture of vegetable cutting machines which are transportable and have a maximum rated power less than 3 kW. It does not apply to domestic machines. It applies when such machines are used to operate under the intended conditions of use as defined in 3.12 of EN 292-1:1991 and stated in the instruction handbook (see 7.1), including cleaning, removal of jammed food, feeding and changing the cutting device. NOTE : If the machine is not used under the above conditions, the manufacturer should, when informed of such a situation, check by a new risk analysis that the preventive measures remain valid. All types of vegetable cutting machines are contained within the scope of this standard including all machines carrying out the function of cutting, shredding, dicing, chipping and grating food products according to the specification of the manufacturer whatever the cutting motion. In particular, this standard covers those vegetable cutting machines consisting of a chamber in which a knife or cutting disc rotates, machines of rotating drum type in which the cutting is done by fixed knives and potato chipping machines with a horizontal reciprocating motion. It applies to all such machines in which the product passes through the machines. This standard does not cover those machines as food processors or peelers which are covered by specific standards. The hazards of automatic feeding devices are not covered by this standard. This standard excludes vegetable cutting attachments which are mounted onto machines having an auxiliary drive hub such as planetary mixers, and which are dealt with in a specific Standard. It covers all significant hazards at such machines, as identified by risk assessment (see EN 1050), which are listed in clause 4 of this standard. Noise can be a significant hazard for some large machines. At the present time, there is insufficient information of emission value and noise attenuation measures to enable an achievable noise emission level to be set nor requirement specified. In the meantime noise measurements shall be made according to annex A and information given to users and where the noise is significant makers have to comply with Directive requirements to reduce noise emission as far as possible. This standard does not deal with the hazard of vibrations. This standard applies primarily to machines which are manufactured after its date of issue.

Dokumentinformasjon

  • Standard fra SN
  • Publisert:
  • Tilbaketrukket:
  • Utgave: 1
  • Versjon: 1
  • Varetype: NAT
  • ICS 67.260
  • National Committee SN/K 131

Referanser i lov

EU lov: 89/392/EEC

Produktrelasjon